Services
Sheet, tube & plate fabrication by robots for humans.
Magician
Laser cutting
Sheet cutting
Tube cutting
Part dimensions
Sheet / Plate · Tubes
Sheet / Plate
- Max cut size
- Up to 1500 × 3000 mm
Sheet thickness
| Material | Thicknesses offered (mm) |
|---|---|
| Mild / carbon steel | 1, 1.2, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16 |
| Stainless steel | 1, 1.2, 1.5, 2, 2.5, 3, 4, 5, 6, 8 |
| Aluminium | 1, 1.2, 1.5, 2, 2.5, 3, 4, 5, 6 |
Tubes
- Max length
- 6000 mm
- Round
- Up to Ø210 mm
- Square / rectangle / flat-oval
- Up to 210 × 210 mm
Tube sections we cut
Stock availability varies| Type | Size range | Common steps |
|---|---|---|
| Round tube | 12 to 200 mm OD | 12, 15, 20, 25, 32, 40, 50, 63, 75, 90, 100, 125, 150, 200 |
| Square tube | 12 to 150 mm across flats | 12, 15, 20, 25, 30, 32, 40, 50, 60, 63, 75, 80, 90, 100, 125, 150 |
| Rectangular tube | Width 20 to 210 mmHeight 10 to 150 mm | 20x10, 30x15, 40x20, 50x25, 60x30, 75x25, 75x50, 80x40, 90x45, 100x50, 120x60, 150x50, 150x75, 160x80, 200x100, 210x150 |
| Flat-oval tube | Width 20 to 100 mmHeight 10 to 50 mm | 20x10, 30x15, 40x20, 50x25, 60x30, 80x40, 100x50 |
Wall thicknesses: 1.2, 1.6, 2.0, 2.5, 3.0, 3.2, 4.0, 5.0, 6.0 mm.
Tolerances
- Sheet cutting
- ±0.10 mm
- Tube cutting
- ±0.20 mm
Other info
- Compressed air
- −40 °C dew point — extremely dry air, from a screw compressor with a desiccant dryer
Assist gas options
| Material | Available gases | Recommended | Cost |
|---|---|---|---|
| Mild / carbon steel | Air, O₂, N₂ | O₂ for thicker parts, N₂ for clean edges | N₂ $$$ · O₂ $$ · Air $ |
| Stainless steel | Air, N₂ | N₂ | N₂ $$$ · Air $ |
| Aluminium | Air, N₂ | N₂ | N₂ $$$ · Air $ |
Gas selection
- Air — Lowest cost. Economical cutting where slight oxidation or discoloration is acceptable.
- O₂ — Medium cost. Recommended primarily for thicker mild / carbon steel.
- N₂ — Highest cost. Best edge quality and oxide-free cuts — particularly stainless steel and aluminium.
Finished parts, sorted automatically
Bins
500 × 500 mm
Pallets/Racks
1165 × 1165 mm
Platforms
1500 × 3000 mm
Bender
Bending
Sheet bending
Tube bendingOn request
Part dimensions
Sheet / Plate · Tubes
- Max part weight
- 9 kg
Sheet / Plate
Bending capability by thickness
| Thickness | Inside bend radius (effective) | Min flange | MS / carbon steel | Stainless steel | Aluminium |
|---|---|---|---|---|---|
| 0.8 mm | 1.0 mm | 4.5 mm | 1600 mm | 1600 mm | 1600 mm |
| 1.0 mm | 1.3 mm | 6 mm | 1600 mm | 1600 mm | 1600 mm |
| 1.2 mm | 1.3 mm | 6 mm | 1600 mm | 1600 mm | 1600 mm |
| 1.5 mm | 2.0 mm | 8.5 mm | 1600 mm | 1600 mm | 1600 mm |
| 2.0 mm | 2.6 mm | 11 mm | 1600 mm | ~1200 mm | 1600 mm |
| 2.5 mm | 3.5 mm | 16 mm | 1600 mm | ~1050 mm | 1600 mm |
| 3.0 mm | 4.0 mm | 17 mm | ~1200 mm | ~800 mm | 1600 mm |
Bend radius is set by our tooling per thickness — we don't offer custom radii. For larger radii, contact us at manufacture@xlogiclabs.com.
Tubes
- Tube bending
- On request
Tolerances
- Bend angle
- ±0.5–0.7°
Welder
Welding
Laser welding
MIG welding
Pre-weld
Laser cleaning
Edge preparation (die grinding)
Post-weld
Grinding
Sanding
Part dimensions
- Work envelope
- 1000 × 3000 × 700 mm
Weld thickness by material
| Material | MIG | Laser |
|---|---|---|
| MS / carbon steel | 25 mm standard | 4 mm standard |
| Stainless steel | 20–25 mm standard | 4 mm standard |
Other info
- Materials
- Mild / carbon steel and stainless steel. We do not weld aluminium.
!Humanoid
Tending
Weld robot tending
Self-clinching
Studs
Nuts
Standoffs
RivetsOn request
Blind rivets
Rivet nuts
Rivet studs
Welded
Studs
Nuts
Surface finishing
Deburring
Polishing
Buffing
Sanding
Misc.On request
Final assembly
Packaging
Testing
Other info
- Positioning accuracy
- ±0.05 mm
- Max part weight
- 3.5 kg (not applicable for surface finishing)
Others
CoatingPartner factory
Powder coating
MachiningOn requestPartner factory
Plate machining
3 Axis CNC VMC
CNC Turning
Available Materials & Grades
Sheet
- MS HR
- MS CRCA
- SS202
- SS304
- SS316/316L
- Aluminium commercial
- Aluminium 5052-H32
- Aluminium 6061-T6
Tube
- MS
- SS202
- SS304
- SS316/316L
- Aluminium 6063
- Aluminium 6061-T6
Send us a part.
Upload a CAD file and see drawings, DFM and a real price in seconds.